What is HCAT in IM readiness?
HCAT on your scanner is usually a readiness status, not a trouble code. Here’s what Ready, Incomplete, and N/A mean, what AIR stands for, which catalyst codes need attention, and how to fix them.
You plug in a code reader before an emissions test, and next to "CAT" and "EVAP" there's a line labeled HCAT — maybe with an X, maybe with "N/A." Is that an HCAT code you need to fix? Usually not in the way you'd think. Here's what HCAT and its neighbor AIR mean, when they matter, and what to do when they don't show "ready."
What Does an HCAT Code Mean on a Code Reader?
What is your scanner actually telling you? HCAT stands for heated catalyst. Some catalytic converters have a heater that brings them up to working temperature faster after a cold start, when emissions are highest. The OBD2 system watches that heater: under California's OBD II regulation, it must flag a fault when the catalyst doesn't reach its designated heating temperature within the required time after start-up (CARB, 13 CCR 1968.2).
Common misconception: "HCAT is a trouble code." On most scanners, HCAT is a readiness monitor — a self-test status — not a P-code. A fault in the system shows up as a separate trouble code.
What is HCAT in I/M readiness?
The I/M (inspection and maintenance) readiness screen lists each emissions self-test and whether it has run. HCAT will show one of three states:
| HCAT status | What it means | What to do |
|---|---|---|
| Ready / Complete | The heated catalyst self-test has run | Nothing |
| Not Ready / Incomplete | The test hasn't finished yet — not proof of a failed part | Drive through a full drive cycle and recheck |
| N/A / Not Supported | Your vehicle doesn't have a heated catalyst | Nothing — it doesn't apply |
Rule of thumb: N/A → ignore it. Incomplete → drive more. A stored trouble code → diagnose.
HCAT and AIR Code Meaning on an OBD2 Scanner
Why do HCAT and AIR usually sit side by side? Both are cold-start emissions systems, and many cars have neither.
What does AIR mean on a code reader?
AIR is the secondary air injection monitor. CARB defines secondary air as air introduced into the exhaust by a pump, aspirator valve, or other means to help burn off hydrocarbons and carbon monoxide. It has nothing to do with intake airflow or the A/C.
- HCAT and AIR both N/A → very common; your car simply isn't equipped with them.
- HCAT or AIR incomplete → the system exists, but its self-test hasn't run since codes were cleared or the battery was disconnected.
- Both incomplete together → often just a sign that no qualifying cold start has happened yet, not that both systems failed.
HCAT Code on Car: Trouble Codes That Point to the Catalyst
So when is an HCAT code a real fault? When a stored trouble code appears alongside the readiness status. These are the catalyst codes most often linked to it:
| Code | Meaning |
|---|---|
| P0420 / P0430 | Catalyst system efficiency below threshold (Bank 1 / Bank 2) |
| P0421 / P0431 | Warm-up catalyst efficiency below threshold (Bank 1 / Bank 2) |
| P0423 / P0433 | Heated catalyst efficiency below threshold (Bank 1 / Bank 2) |
| P0424 / P0434 | Heated catalyst temperature below threshold (Bank 1 / Bank 2) |
Important: a catalyst code doesn't automatically mean a bad converter. Oxygen sensors, exhaust leaks, and engine problems can all trigger one — our P0420 diagnosis guide walks through the usual suspects.
How to Fix an HCAT Code
What should you actually do? Start by working out which situation you're in.
- Read the readiness screen and any stored codes. If HCAT says N/A and there are no codes, you're done.
- If HCAT is incomplete with no codes, let the car sit long enough for a true cold start, then drive a full drive cycle and recheck.
- If a catalyst code is stored, compare upstream and downstream O2 sensor live data. A downstream sensor that switches as fast as the upstream one suggests the catalyst isn't storing oxygen.
- Check for exhaust leaks near the upstream O2 sensor and catalyst — they can skew readings.
- On heated catalyst systems, test the heater circuit: relay, fuse, wiring, and connectors for voltage and continuity.
- Repair, clear the code, and drive. Recheck readiness to confirm the monitor completes and the code doesn't return.
Which tool fits the job?
- DIY Owners checking the heater circuit → the AutoLink AL539B combines one-touch I/M readiness, an O2 monitor test, and live data with a built-in multimeter for measuring heater-circuit voltage and resistance.
- DIY Owners comparing O2 sensors → the MaxiCheck MX900 graphs up to five PIDs on one screen, so upstream and downstream O2 readings sit side by side, and adds I/M readiness, O2 sensor, and on-board monitor tests.
- Shops and Technicians → the MaxiSys Ultra VCMI works as a 4-channel oscilloscope and multimeter for checking O2 sensor signals and heater circuits, alongside full-system diagnostics.
Pro Tip: clearing codes doesn't fix anything — it resets every monitor to incomplete, including HCAT. Only clear after the repair.
See HCAT, AIR, and every other monitor in seconds.
Autel code readers check I/M readiness before your emissions test.
Shop Autel OBD2 code readersScanners and update cards are cheaper during promotions — see current deals.
Will an HCAT Code Fail Your Emissions Test?
Can a "Not Ready" HCAT cost you your smog certificate? It depends on whether it applies and where you live.
- N/A monitors → don't count against you, because the system isn't on the car.
- Incomplete monitors that apply → states set different limits. In California, BAR currently lets 2000 and newer gasoline vehicles pass with only the EVAP monitor incomplete — so an incomplete HCAT means a return trip (BAR).
- Stored catalyst codes → the check engine light is on, which fails most OBD-based inspections.
Planning a test? See how long a smog check takes and how to prepare.
FAQs
Is it safe to keep driving with P0420 stored?
Usually, yes, in the short term, but emissions will be higher and the cause can get worse. Diagnose it soon, especially before an inspection.
Does the emissions warranty cover a heated catalyst?
Often, yes. The federal rule 40 CFR 85.2103 lists catalytic converters and related components as specified major emission control components, covered for 8 years or 80,000 miles, whichever comes first. Check your warranty booklet for details.
Why did HCAT turn incomplete after a battery change?
Disconnecting the battery or clearing codes resets the readiness monitors. They complete again after the right driving conditions.
The Bottom Line on the HCAT Code
An HCAT code on your scanner is usually a readiness status, not a failure: N/A means the car doesn't have a heated catalyst, incomplete means keep driving, and only a stored trouble code calls for repair. No more panicking over three letters on the readiness screen. Just read the status, drive the cycle, and fix only what the codes point to.