Skip to content

🔥Black Friday Starts Early! Extra [1 5% OFF] Sitewide

Shop Now

Auto-Applied at Checkout · No Code Needed

Authorized Autel Dealer · Fast & Free US Shipping

Shop by Category
Shop by Function
Best Sellers
Deals & Buying Help
Need Help?
Email Whats App
Live Chat
FAQ

How to Reset Oil Light: Scan Tool Steps and Manual Methods by Brand

by AsherReed 02 Nov 2026 0 comments

Changed the oil but the reminder's still on? Reset it in six steps with an Autel scan tool, plus fixes when the light won't clear.

How to reset oil light: Autel MX900 Oil Reset screen connected to the OBD2 port

Fresh oil, new filter, and the dash still says the oil life is at 0%. The reminder doesn't know you've done the job until you tell it. Here's how to reset oil light reminders with a scan tool, step by step, using the Autel MX900 on a real car. You'll also find what to check when the light won't clear, and which Autel tools include oil reset.

Important: reset the reminder only after the oil and filter have actually been changed. And make sure it's the right light. A red oil can or an oil pressure warning that comes on while the engine runs means low oil pressure. Pull over safely, switch off the engine, and check the oil level instead of resetting anything.

How to Reset Oil Light With a Scan Tool

Why use a scan tool when buttons exist? Many newer vehicles hide the reset deep in menus, some need a guided sequence, and a scan tool can also set the next interval. Here's the full procedure with the Autel MaxiCheck MX900, using a 2014 Opel Astra J as the example. Menu names vary by vehicle, so follow the on-screen prompts.

Step 1: Plug In the MX900

  • Find the port → it's usually under the dashboard on the driver's side. Our OBD port location guide shows common spots.
  • Plug in and power up → connect the MX900, then turn the ignition on with the engine off.

Step 2: Identify the Vehicle

  • Open Diagnostics → tap the Diagnostics icon, then choose Auto Detect.
  • Let it read the VIN → the tool scans the VIN and loads the brand list, then asks you to accept a disclaimer and choose stand-alone diagnostics.
  • Confirm the profile → check the decoded vehicle details.

Step 3: Run a Quick Scan (Optional but Smart)

  • Scan every module → the MX900 checked the engine, brake, airbag, and other modules before the reset.
  • Why bother → if another warning is waiting, you'll see it now instead of resetting the reminder over a real fault.

Step 4: Open Oil Reset

  • Go to Hot Functions → this menu groups the common services, such as oil reset, electronic parking brake, and TPMS.
  • Select Oil Reset → the tool may ask a few questions about the vehicle's equipment first. Answer them to match your car.

Step 5: Follow the Reset Prompts

  • Select the oil life reset → choose the engine oil life reset and confirm.
  • Cycle the ignition on command → the tool asked for the ignition off, a short countdown, then the ignition back on, before sending the reset command.
  • Watch for confirmation → the screen showed "Performed successfully."

Step 6: Verify on the Dash

  • Check the oil life display → the instrument menu should show oil life back at 100%.
  • Restart to confirm → turn the ignition off and back on, and make sure the reminder stays off.

Pro Tip: if the reset fails, check that the vehicle meets the conditions the tool asks for, such as the ignition position, then follow the prompts and try again a few times.

Tech Note: many cars also have a dashboard, button, or pedal sequence for the reset, described in the owner's manual. These sequences vary by make, model, and year and depend on exact timing, and on newer vehicles the reset can be buried in menus. A scan tool identifies the car by VIN and guides you through the right procedure.

Oil Light Won't Reset? What to Check

Did the reminder come right back? Work through these checks.

  • Ignition position → most reset routines need the ignition on with the engine off, and some ask you to cycle it at a set moment. Follow the prompts exactly.
  • Scan tool connection and vehicle selection → reseat the connector and confirm the correct vehicle was identified.
  • Low battery voltage → a weak battery can interrupt the reset. Charge it and try again.
  • No resettable monitor → some older vehicles don't have one. Check the owner's manual, and keep checking the dipstick regularly.
  • Other warnings on the dash → if the light stays on alongside other warning lights, have the vehicle checked by a professional.

Autel Scanners With Oil Reset

Autel MaxiCheck MX900: The Scan Tool Behind This Guide

Product Card: maxicheck-mx900

  • Oil reset made easy → Oil Reset sits in the Autel MaxiCheck MX900's Hot Functions menu.
  • Fast vehicle ID → AutoVIN reads the make, model, and year in seconds, so you start from the right procedure.
  • A check before the reset → full-system scans show whether another fault is waiting before you clear the reminder.
  • 40+ service functions → oil reset plus ABS bleeding, brake pad reset, and more, so the same tool covers your next maintenance job.
  • Deeper diagnostics → 3,000+ bidirectional active tests and a 5-in-1 live data view.
  • Ready for newer vehicles → CAN FD and DoIP support on an 8-inch touchscreen with a wired vehicle connection.
  • Best for → owners who want oil resets today and full diagnostics as their vehicles get newer.

Autel Oil Reset Tools Compared

Prefer a different screen or budget? All four tools below list oil reset on their product pages.

MaxiCheck MX900 MaxiCOM MK808S MaxiDIAG MD906 Pro MaxiAP AP2500E
Best for Oil resets plus deep diagnostics on late-model vehicles (the tool used in this guide) Oil resets plus EPB, ABS bleed, and battery jobs Common services with lifetime free updates Oil resets and code reading from your phone
Price tier Under $550 Under $400 Under $300 Under $100
Screen and connection 8", wired 7", wired 5.5", Bluetooth VCI Phone app, Bluetooth adapter
Oil reset Yes Yes Yes Yes
Service functions 40+ 28+ 11 Oil, TPMS, battery
Active tests 3,000+ Yes — —
CAN FD / DoIP Yes — — —

DIY Owners: resetting the light yourself saves a trip to the shop after every oil change, and the same tool reads codes when other warnings appear. Shops and Technicians: a scan tool clears reminders that the dash controls won't, and can set the next service interval.

Autel promotions are on now.

Save on scan tools with oil reset, diagnostic tablets, and update cards while the offers last.

Get current Autel deals

Or browse Autel DIY tools.

FAQs

Oil reminder vs. oil pressure warning: what's the difference?

The oil change light is a maintenance reminder from the oil life system. The oil pressure light warns that oil pressure has dropped while the engine runs, which needs immediate attention: stop safely, turn off the engine, and check the oil level.

Does topping up the oil turn the reminder off?

No. The reminder stays on until it's reset after an oil and filter change. Adding oil only corrects the level.

What oil change interval should you follow?

Follow your owner's manual or the oil life monitor. The old 3,000-mile rule is outdated for many modern engines and oils, and intervals vary by vehicle, oil type, and driving conditions.

The Bottom Line on How to Reset Oil Light Reminders

Knowing how to reset oil light reminders takes a few minutes once the oil and filter are changed. A scan tool like the Autel MX900 identifies the car, walks you through the right reset procedure, and confirms the result, even when the reset is buried in menus. Autel promotions are running now on the deals page.

Prev post
Next post

Leave a comment Leave a comment

All blog comments are checked prior to publishing

Thank you for signing up!

This email has been registered!

Shop the look

Choose options

Edit option
Back In Stock Notification

Choose options

this is just a warning
Login
Shopping cart
0 items