Maint Reqd Light Explained: Meaning, Reset Steps, and Next Moves
The maint reqd light is a mileage reminder, not a fault warning. Here's what flashing and solid mean, why it stays on after an oil change, and three ways to reset it.
You start the car, and an amber "MAINT REQD" message glows on the dash. Is something wrong? Usually not. The maint reqd light is a scheduled-service reminder, not a fault warning — but it still deserves a response. Here's what it means, why it sometimes stays on after an oil change, and how to turn it off in a couple of minutes.
What Does the Maint Reqd Light Mean?
So what is your car actually telling you? That it's been about 5,000 miles since the reminder was last reset, and routine service is due.
- It's a mileage counter → on most Toyota and Lexus models, it tracks distance since the last reset. It doesn't measure oil quality or read any sensor.
- A few seconds at start-up → normal; the light briefly comes on as a bulb check, then goes out.
- Flashing → you're roughly 4,500 miles past the last reset; service is coming up.
- Solid → you've reached about 5,000 miles; it's time to book service.
Other brands use similar systems under different names — Honda's Maintenance Minder, for example, shows codes such as "A" for an oil change and "1" for a tire rotation.
Maint reqd light or check engine warning: which is which?
| MAINT REQD reminder | Check engine light | |
|---|---|---|
| Triggered by | Miles since the last reset | A detected engine or emissions fault |
| Stores a trouble code? | No | Yes |
| Urgency | Schedule service soon | Get it diagnosed promptly; flashing means urgent |
Rule of thumb: if both lights are on, deal with the check engine light first. Our Toyota check engine light guide covers the codes and resets.
Service Behind the Maint Reqd Light: What's Due and When
What service is the reminder asking for? Usually the basics, every 5,000 miles or six months — whichever comes first:
- Oil and filter change (synthetic oil may allow longer intervals — check the owner's manual)
- Tire rotation
- Fluid inspection and top-off: brake, coolant, transmission, washer
- Brake pad and rotor inspection
- Wiper blade and multi-point inspection
Why is my maintenance required light on after an oil change?
Because the counter was never reset. Changing the oil doesn't tell the car anything — someone has to reset the reminder. That usually happens when a shop forgets the step, or when you do the oil change yourself.
Common misconception: "The light knows my oil is old." It doesn't. It only counts miles, so it can't tell fresh oil from dirty oil.
How to Turn Off Maint Reqd Light: Three Reset Methods
Ready to reset it? Pick the method that matches your instrument cluster — and only reset after the service is done.
Maint reqd light reset with the trip button (most models through about 2017)
- Turn the ignition to ON without starting the engine.
- Set the display to the odometer (ODO) — on some models, Trip A.
- Turn the ignition OFF.
- Press and hold the trip reset button, then turn the ignition back to ON while still holding it.
- Keep holding for about 10–15 seconds while the light flashes or the dashes count down, until it goes out.
- Release, switch off, and start the engine to confirm.
Tech Note: on many Lexus models the light stays solid for about 3 seconds, blinks for about 2, then goes solid for a second before turning off. If it keeps blinking at the first stage, start over from step 1.
Reset through the steering-wheel settings menu (most models from about 2018)
- Turn the ignition ON without starting the engine (on push-button models, press START twice without the brake).
- Use the steering wheel arrows to open the settings (gear) menu.
- Select "Scheduled Maintenance," then confirm the reset with OK.
- Restart the vehicle to make sure the message is gone.
Turn it off with a scan tool
A scan tool with an oil-reset function skips the button sequences entirely. Plug into the OBD2 port — our OBD port location guide shows where — then choose the oil or maintenance reset for your vehicle.
- DIY Owners → the MaxiCOM MK808S includes oil reset among its special service functions, alongside EPB, SAS, BMS, and TPMS resets, plus full-system diagnostics.
- DIY Owners with several vehicles → the MaxiCheck MX900 identifies each car with AutoVIN and lists oil reset among 40+ service functions.
- Shops and Technicians → the MaxiSys MS906 Pro adds 36+ service functions and 3,000+ bidirectional active tests.
Service functions vary by make, model, and year, so check coverage for your vehicle before you buy.
Important: resetting the light doesn't service the car. Reset only after the work is done, or the next reminder arrives too late.
What happens if you don't reset your oil life?
The reminder stops being useful. The light stays on, and the counter keeps measuring from the old service — so the next alert lands at the wrong time and is easy to ignore. Skipping the service itself is worse: old oil means more engine wear and lower fuel economy.
Reset maintenance lights in a few taps.
Autel service tools handle oil resets and more.
Shop Autel service toolsScanners and update cards are cheaper during promotions — see current deals.
Can I Drive With My Maintenance Required Light On?
Do you need to pull over? No — short-term driving is fine. Just don't put the service off for long.
- The reminder alone → keep driving and book service soon.
- With check engine, oil pressure, temperature, or brake warnings → get the car inspected before any long trip.
- Strange noises or a drop in power → have it checked right away.
Maintenance Cost, Saving Money, and When to See a Pro
What will the service cost — and where can you save? Typical ranges:
- Basic 5,000-mile service (oil change, tire rotation, fluid check) → about $50–$150.
- Oil and filter change alone → about $75–$150; trucks and SUVs usually cost more.
- Tire rotation → about $35–$100.
- Higher-mileage services → about $200–$600 or more.
Here's where a scan tool earns its keep. Change your own oil, and you'd normally still need the shop — or a lot of button pressing — to clear the reminder. With an Autel scanner, you reset it yourself in a minute, check for stored codes before you pay anyone for a diagnosis, and use the same tool later for brake, steering angle, and battery registration jobs. Autel tools are priced lower during promotions.
Pro Tip: doing the service yourself? Keep receipts and a mileage log for every oil change. Your service records — not the light — are what protect your warranty.
Red Flag: see a technician if the light won't reset after two or three tries, comes back right after a reset, or shows up with other warning lights.
FAQs
Does "Maintenance Required Soon" mean something different?
No. Newer displays spell out the same reminder, and some models show a wrench icon instead.
Can a DIY reset cause warranty problems?
No. Resetting the light doesn't void a warranty. What matters is that the scheduled maintenance is actually done on time and you keep the service records.
What if the reminder won't clear after a reset?
Usually the display was on the wrong mode, or the button was released too early. Confirm the odometer setting, try again, and see a technician if it still won't clear.
The Bottom Line on the Maint Reqd Light
The maint reqd light is a mileage reminder, not a breakdown warning. Do the service, then reset it with the trip button, the settings menu, or a scan tool. No more driving around with an amber reminder you can't switch off. Just service, reset, and drive on.